Assembling the Case--Part Three
Rainbow Musical Instrument Cases & Bags teach you how to make it.
1.Attach the loop panel to the back panel. (There show the classical guitar case how to attach the panel )
Take the loop panel you created from connecting the zipper and side panels and sew an edge of it to one of the two panels you made for the front and back of the case. The right sides (exterior fabric) of the panels should be facing in.
Decide where you want the zipper to be at this stage. Sew the zipper section of the loop panel to the back panel wherever you want the case to open: it could be along one full side of the case, or slightly more curved around the base or neck, depending on how you would want to pull your guitar out.
Use a heavy needle in your sewing machine if you're having trouble getting through all the layers of fabric and duck cloth.
If you decided to use piping, make sure it is sandwiched between the two panels and that your stitch comes as close to the piping as possible. Use a zipper foot on your sewing machine for this.
2.Attach the front panel.
Pin the front panel to the other edge of the loop panel and sew together as you did with the back panel. Make sure you unzip the zipper first so you have a way to turn it right side out when all the sewing is done.
